Skip to main content

Arduino VENTUNO Q

Arduino VENTUNO Q development board

The Arduino VENTUNO Q is a development platform for edge artificial intelligence (AI) and real-time control. It is equipped with a Qualcomm Dragonwing IQ8 (QCS8275) microprocessor (MPU) and an STM32H5F5 microcontroller (MCU), which run Ubuntu Linux and Zephyr-based Arduino programs, respectively. Through Arduino App Lab, Python, Arduino Sketches, and functional modules can be organized within the same application.

SKUProduct
35981Arduino VENTUNO Q

Key Specifications​

Computing and Storage​

ItemSpecification
MPUQualcomm Dragonwing IQ8 (QCS8275), octa-core processor
MCUSTM32H5F5, Arm Cortex-M33, up to 250 MHz; 4 MB Flash, 1.5 MB RAM
Memory16 GB LPDDR5
Onboard storage64 GB eMMC
AI accelerationHexagon neural processing unit (NPU), up to 40 dense TOPS
Graphics processingAdreno 623 GPU
SystemMPU: Ubuntu Linux; MCU: Arduino Core on Zephyr OS

Connectivity and Expansion​

ItemSpecification
Wired network1 RJ45 Ethernet port, up to 2.5 Gbit/s
Wireless connectivityWi-Fi 6, 2.4/5/6 GHz; Bluetooth 5.3
USB2 USB 3.0 Type-A ports; 1 USB-C port supporting host/device role switching, DisplayPort Alt Mode video output, and USB PD power input
Display interfacesHDMI Type-A; USB-C supports DisplayPort Alt Mode video output
Camera interfaces3 onboard MIPI CSI camera connectors
Storage expansionM.2 M-key, PCIe 4.0 ×4, supports 2230-format NVMe SSD; SATA M.2 drives are not supported, and it cannot be used as a boot drive
Expansion interfacesUNO headers, Qwiic, 40PIN header, CAN-FD screw terminal, and JMEDIA, JMISC, and JOMEGA expansion connectors
Onboard indicators and display4 RGB LED groups, 8 × 13 blue LED matrix

Form Factor and Environment​

ItemSpecification
Operating temperature-10–60°C
Dimensions160 mm × 100 mm

How the Two Processors Divide the Work​

Arduino VENTUNO Q main component locations, source: Arduino official manual

PartPrimary use
Linux / MPUUbuntu desktop, Python programs, networking, USB peripherals, image processing, and AI applications
Arduino / MCUDigital input/output, analog sampling, PWM, I2C, SPI, UART, and other peripheral control on the UNO headers
BridgeA communication interface based on remote procedure calls (RPC), used to call functions and exchange data between Python and Sketches

For example, Python can process network data and then call control functions on the MCU through the Bridge; the MCU can collect sensor data and hand it to Linux for processing. When using the UNO headers, names such as D0 and A0 in code refer to the MCU's Arduino pin mapping, not Linux GPIO numbers.

Dimensions and Mounting​

Arduino VENTUNO Q dimensions, source: Arduino official manual

Use standoffs during mounting to keep the solder joints on the bottom of the PCB clear of the mounting surface. Do not place a powered board directly on a conductive surface. For related mechanical files, see Hardware Resources.

Peripheral Options​

CSI Cameras​

The board provides 3 CSI camera connectors. The following cameras have each been tested for video recording on the VENTUNO Q. For connection and usage instructions, see Working with CSI Camera.

CameraSpecificationTest status
IMX219-120 Camera (SKU 16579)IMX219, 8 MP, 120° field of viewSingle-channel 640 × 480 recording
IMX477 12.3MP Camera (SKU 18510)IMX477, 12.3 MPSingle-channel 640 × 480 and 1920 × 1080 recording and live preview

USB-C Docks​

ProductPurposeVENTUNO Q test status
USB-C-HUB-11-IN-1 (SKU 35204)Expands HDMI, USB, Ethernet, and other interfacesTested and in use