Lora

This section introduces how to use the Lora function on the Raspberry Pi, laying the foundation for subsequent project development.

danger

Before connecting a Lora module, switch Reference Designator 12 (M.2 B KEY supply voltage selection) to the 5V position. The Lora module requires 5V.

warning

• The test uses the SX1303. If using other modules, refer to the corresponding Lora module's Wiki.
• The board itself does not support Lora; it requires an adapter board via the M.2 B KEY interface to connect the Lora module.

Lora Usage

• Various module usage: SX1302 / SX1303

---