ESP32-C5-LCD-1.47
When soldering pin headers, you do not need to remove the screen. Simply tilt the soldering iron and solder directly.
Overview
The ESP32-C5-LCD-1.47 is a microcontroller development board that supports 2.4 GHz / 5 GHz Wi-Fi 6, Bluetooth 5 (LE), and IEEE 802.15.4. It features an onboard 1.47inch LCD, TF card slot, RGB LED, and common peripheral interfaces, making it suitable for ESP32-C5 HMI, wireless communication, and embedded display applications.
| SKU | Product |
|---|---|
| 34961 | ESP32-C5-LCD-1.47 |
| 34960 | ESP32-C5-LCD-1.47-M |
If you are looking for:
- Coding with AI tools: Click Ask AI and select an AI tool to ask questions about this page, or choose Copy page to copy its content and paste it into an AI tool for coding assistance.
- Schematics, datasheets, and example code: See Resources
- Arduino development: See Working with Arduino
- ESP-IDF development: See Working with ESP-IDF
- Troubleshooting: See Product FAQ or contact Technical Support
Features
- Equipped with ESP32-C5FH4, RISC-V 32-bit processor running at up to 240 MHz, with a low-power processor running at up to 48 MHz
- Supports 2.4 GHz / 5 GHz Wi-Fi 6, Bluetooth 5 (LE), Zigbee 3.0 and Thread 1.4
- Onboard 320 KB ROM, 384 KB HP SRAM, 16 KB LP SRAM, and 4 MB Flash
- Onboard 1.47inch LCD screen, 172 × 320 resolution, 262K colors
- Onboard USB-C port supporting native ESP32-C5 USB download, debugging, and serial communication, depending on firmware configuration
- Onboard TF card slot for external TF card storage of images or files
- Onboard WS2812 RGB LED
- Adapting multiple GPIO pins via an 18PIN header
Onboard Resources

- ESP32-C5FH4
- MP1605GTF Step-down DC-DC converter, 1A output (Max.)
- TF card slot
- BOOT button
- RESET button
- USB Type-C
- Onboard ceramic antenna
- WS2812 RGB LED
Interface Overview

-
LCD
LCD Pin ESP32-C5 LCD_CLK GPIO7 LCD_DIN GPIO6 LCD_CS GPIO23 LCD_DC GPIO24 LCD_RST GPIO26 LCD_BL GPIO10 -
RGB LED
RGB LED ESP32-C5 WS2812 GPIO8 -
TF Card
TF Card ESP32-C5 MISO GPIO5 MOSI GPIO6 CLK GPIO7 CS GPIO4 -
UART0
UART0 ESP32-C5 TX GPIO11 RX GPIO12 -
USB
USB ESP32-C5 D+ GPIO14 D- GPIO13
Product Dimensions

Product Specifications
| Parameter | Value |
|---|---|
| Interface | USB Type-C |
| Main Chip | ESP32-C5FH4 |
| Flash | 4 MB |
| Screen Type | TFT |
| Screen Size | 1.47 inches |
| Screen Resolution | 172 × 320 |
| Screen Interface | SPI |
| Screen Controller | ST7789 |
| Touch | None |
| Onboard Devices | TF, WS2812 RGB LED |
| Broken-out Interface | 18PIN header |
Development Approaches
The ESP32-C5-LCD-1.47 supports two development frameworks: Arduino IDE and ESP-IDF. Arduino IDE is suitable for prototyping and running examples; ESP-IDF provides Espressif's official toolchain, components, and configuration system, making it suitable for application development that requires fine-grained configuration.
- Arduino IDE: Refer to Arduino Development to set up the development environment and run the example programs.
- ESP-IDF: Refer to ESP-IDF Development to set up the development environment and run the example programs.
