Skip to main content

FAQ

Q: When a GPIO pin on Raspberry Pi Pico 2 is configured as a pull-down input and left floating, why does it read as a high level?

A: Please refer to the RP2350-E9 section in the RP2350 Datasheet.

Q: Is the main chip suffix A2 or A4?

A: A4, the RP2350-E9 error mentioned above has been fixed.

Q:1. Does the PIO-USB port in host mode support hot-plugging?2. The PIO-USB port in host mode does not respond after connecting a keyboard or mouse?

A:

  1. Yes, but the PIO-USB D+ pull-up resistor needs to be removed.
  2. The connected keyboard or mouse may be a USB low-speed device, so the PIO-USB D+ pull-up resistor needs to be removed.

Tips:

  1. After removing the PIO-USB D+ pull-up resistor, the PIO-USB port can no longer be used as a device.

  2. Location of the RP2350-USB-C D+ pull-up resistor:

    VSCode-Example-4

  3. Location of the RP2350-USB-CM D+ pull-up resistor:

    VSCode-Example-4